Vince O´Neill Plumbing
Thu 11 Mar 2010

  HOME  
  About  
  Heaters  
  Stoves  
  Barbecues  
  Plumbing Services  
  Hot Water  
  Water Filtration  
  FAQ  
  Contact  
  Email  

 


COMBUSTION STOVES

CHOOSE A MANUFACTURER

STANLEY STANLEY TRADITIONAL

STANLEY DELUXE
STANLEY STANLEY SUPER STAR

SUPERB STANLEY FEATURES:
  • Luxurious Vitreous Enamel Finish In A Range Of Attractive Colours (Traditional also available in Senotherm black paint)
  • Overnight Burning
  • Powerful Central Heating (S/Star only), Domestic Hot Water or Non-Boiler Models Available
  • Cast Iron Oven(s) - second simmer oven in the Super Star only
  • Platerack & Splashback Option
  • Double Glazed Oven Door (S/Star only)
  • Self Cleaning Oven(s)
  • Simple Finger Tip Controls
  • Large Hot Plate(s)
  • Insulating Hot Plate Covers (S/Star only & D90, optional on Traditional)

FUEL: Seasoned & dry wood, coal or briquettes all burn effectively and efficiently. Consumption and cooker output will vary according to the calorific value and quantity of fuel used.

FLUE: Appropriate 152mm flue can be connected to either top or rear of cooker. Minimum length 4.5m.

CHOICE OF BOILER MODELS:
H.P.B. Super Star (Central Heating) model has the capacity to service a central heating system with radiators rated to approximately 15kw when installed in conjunction with an average size hot water supply. The circulatory system should include an indirect 180 - 270 litre (40 to 60 gallon) hot water storage cylinder.
All pipe fittings are 1\" (25mm) flow & return.
For summer use, or at other times when central heating is not required, the boiler output can be reduced by means of a summer grate to reduce the size of the firebox. Components are supplied with the cooker.

D.H.W. (Domestic Hot Water) unit is equipped with a boiler (2.5 litre capacity) designed to supply hot water to the bathroom & kitchen. The boiler has 1\" (25mm) tappings at the rear of the cooker to connect to a 180 or 270 litre (40 or 60 gallon) direct (low pressure) water cylinder as recommended by the plumber. The boiler is stainless steel to resist corrosion. Non Boiler & Domestic Hot Water versions available in all models.

Dimensions:
Height to top of platerack 1384 mm
Height to hob level 876 mm
Depth 617 mm
Width 914 mm
Weight (approx) 310 kg

Minimum Clearance to Combustible Materials
Below Hob Left - 100mm Right - 150mm
Above Hob Left - 450mm Right - 350mm
Rear 25mm

Clearances apply only to units with splashback fitted.  

   
   



FLU and CHIMNEY CLEANING
© VINCE O'NEILL PLUMBING (QLD) Pty Ltd 24 STRADBROKE STREET TOOWOOMBA QLD AUSTRALIA 4350
A.B.N. 68 085 970 690
TEL: 07 4633 3960   FAX: 07 4633 3854  PRIVACY
SITE BY: IBD